Crusher tips for reducing wearing parts wear

We know that the wearing parts of the crusher are often worn out during use, and finally they are scrapped. In the end, the new wearing parts must be replaced. How can we maintain the life of the accessories? How often does it take to replace the accessories? The following will be explained by Shanghai Shanzhuo crusher manufacturers.
1. The harder the stone is, the more difficult it is to crush, the more serious the wear of the equipment is, and the slower the crushing speed is, the smaller the crushing capacity is. There is a direct relationship between the degree of hardness of the surface stone and the service life of the crusher parts. It is required that in the process of accessories purchase, accessories of the right material must be selected according to the performance of the stone material.
2. When the moisture contained in the material is large, the material is easily adhered in the crusher, and it is also easy to be clogged in the process of feeding, resulting in a reduction in crushing capacity. The greater the viscosity, the smaller the crushing capacity. It is closely related to the viscosity and temperature of the material and cannot be broken.
3. The smaller the required particle size of the final broken stone is, the slower the crushing speed will ultimately affect the crushing ability.
4. The more fines contained in the material before crushing, the more the crushing ability is affected, because the fine powder easily adheres to affect the transportation. For a lot of fines, one should advance the sieve. In addition, the more impurities in the stone, will also affect the ability to crush. Finally, we need to emphasize the quality of the crusher parts. As the saying goes: It's not a good thing to have a good deal. A good product is not cheap. This is the reason. If the price of an accessory is lower than the general price of an accessory on the market, the quality of the accessory will be strictly explained.
222